Operator Manual
Issue 1
TIL – Eng – Spec – 080
Page 8 of 70
SeaHub
2.5. Safety Statements
NOTE
Throughout the manual certain potential problems, or further information relating to
the installation, maintenance, understanding or use of the apparatus will be
highlighted to the operator by indications identified by the adjacent symbol and text.
CAUTION!
Throughout the manual certain safety or operational related comments and
requirements will be highlighted to the operator by indications identified by the
adjacent symbol and text.
DANGER!
Throughout the manual certain safety or operational related comments and
requirements that could lead to injury or loss of life will be highlighted by the
adjacent symbol and text.
Before proceeding please read all of the following safety points…
DANGER
!
Power Supply & Power Lead
•
Disconnect the unit from a mains or DC power source before attempting
installation or maintenance on the unit. Do not open the unit with a power supply
connected.
•
Do not overload a mains supply outlet, extension cord or adapter as this may
result in electric fire or shock.
•
Do not modify the power cord or plug.
•
Do not bend or twist the power cord.
•
Do not place the power cord near any heat sources that may melt the protective
insulation.
•
Do not use a damaged or defective power cord.
•
Do not use (and unplug) the unit in situations where a power-line surge may occur
(such as a lightning storm), or if the unit is not used for a prolonged period of time.
DANGER
!
Liquids
•
The unit is
NOT
protected against the ingress of water, so take care to avoid
exposing the unit to sources of conductive liquids.
•
Do not touch the unit with wet hands
DANGER!
Maintenance & Cleaning
•
Disconnect the product from the power supply before attempting any maintenance
or cleaning.
•
Do not clean with solvents, and only use a light damp cloth on the exterior of the
unit.
•
Do not undertake maintenance of the unit, outside the scope of that defined within
this manual, unless instructed to do so by
Tritech International Ltd
technical
support.
•
Do not insert extraneous object (metal or other alien substance) into the unit or
any of its connector apertures.
DANGER!
Location & Ventilation
•
Do not place near a source of heat that may cause the operational temperature
parameters to be exceeded, or stacking other heat generating equipment onto of
the unit.
•
Do not block any openings on the unit
•
Always use the unit on a stable, rigid, flat and lint-free surface.
•
Make sure the unit is more than 10cm away from any other appliance that may be
susceptible to electromagnetic interference.
