manualshive.com logo in svg

TrimTrac ProE Locator, Technical Manual

Share
Download
TrimTrac ProE Locator Technical Manual Download Page 14

 

TrimTrac ProE Locator Technical Manual v2.0e 

xiv

 

Minimum Information Required for Technical Assistance 

 
If you or a user reports difficulty with a TrimTrac ProE locator (i.e. no GPS fixes, not 
communicating, LED not working, etc.), it is helpful to retrieve directly from the unit all 
current configuration settings and the message log.  In some cases, a more detailed debug 
log file is required to trouble shoot communications related issues. 
 
Please provide the requested information and follow the procedures described below: 

 
1.

 

Unit IMEI number 

2.

 

Name of SIM Card Carrier 

 

Using a Provisioning Module 

 

1.

 

Insert the Provisioning Module in the TrimTrac ProE and connect to it via 
HyperTerminal. 

 

2.

 

In HyperTerminal under the “Transfer” menu, select “Capture Text” and 
name a file to which the data from the TrimTrac ProE will be saved. 

 

3.

 

To retrieve the configuration and message log, do one of the following: 

 

a.

 

In the HyperTerminal window, type the following AT commands in order: 

 

ATI 
AT+CTKC? 
AT+CTKF? 
AT+CTKJ? 
AT+CTKG? 
AT+CTKK? 
AT+CTKP? 
AT+CTKX? 
AT+CTKY? 
AT+CTKZ? 
AT+CTKO? 

 

b.

 

Rather than repeatedly typing these commands, they can be typed once 
and saved as a text file.  Then use the “Send Text File” command under 
the HyperTerminal “Transfer” menu  to send the text file to the TrimTrac 
ProE. 

 

3.

 

Send the resulting file as an email attachment to your Trimble technical support 
representative. 

 

Summary of Contents for ProE Locator










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands