TRENDnet TW100-BRV324, User Manual

Page: 85 / 135

Microsoft VPN
81
VPN Examples
This section describes some examples of using the Broadband VPN Gateway in common VPN situations.
Example 1: Connecting 2 Broadband VPN Gateways
In this example, 2 LANs are connected via VPN.
Figure 48: Connecting 2 Broadband VPN Gateways
Note
•
The LANs MUST use different IP address ranges.
•
Both endpoints have fixed WAN (Internet) IP addresses.
Configuration Settings
Setting LAN A Gate-
way LAN B Gate-
way Notes
Name Policy 1 Policy 1 Name does not affect
operation. Select a mea-
ningful name.
Remote Endpoint 205.17.11.43 202.11.13.211 Other endpoint's WAN
(Internet) IP address.
Local
IP addresses Any Any Use a more restrictive
definition if possible.
Remote
IP addresses 192.168.1.1 to
192.168.1.254 192.168.0.1 to
192.168.0.254 Address range on other
endpoint.
Use a more restrictive
definition if possible.
Key Exchange IKE IKE Must match
IKE SA Parameters
IKE Direction Both ways Both ways Does not have to match.
Either endpoint can block
1 direction.
Local Identity IP address IP address IP address is the most
common ID method
Remote Identity IP address IP address IP address is the most
common ID method
IKE Authentication
method Pre-shared Key Pre-shared Key Certificates are not widely
used.
Pre-shared Key Xxxxxxxxxx Xxxxxxxxxx Must match