manualshive.com logo in svg

TRENDnet TW100-BRV324, User Manual

Share
Download
TRENDnet TW100-BRV324 User Manual Download Page 128

Broadband VPN Gateway User Guide 

124 

Backup/Restore 

This feature allows you to backup (download) the current settings from the Broadband VPN Gateway, and save them to a file on your 
PC. 

You can restore a previously-downloaded configuration file to the Broadband VPN Gateway, by uploading it to the Broadband VPN 
Gateway. 

This screen also allows you to set the Broadband VPN Gateway back to its factory default configuration. Any existing settings will be 
deleted. 

An example 

Backup/Restore

 screen is shown below. 

 

Figure 108: Backup/Restore File Screen 

Data - Backup/Restore Screen 

Backup  

Use this to download a copy of the current configuration, and store the 
file on your PC. Click 

Backup

 to start the download. 

Restore 

This allows you to restore a previously-saved configuration file back to 
the Broadband VPN Gateway.  

Click 

Browse

 to select the configuration file, then click 

Restore

 to 

upload the configuration file.  

WARNING !

  

Uploading a configuration file will destroy (overwrite) ALL of the 
existing settings. 

Convert  
Language 

Click 

Browse

 to select the file, then click 

Convert

 to upload the file. 

Summary of Contents for TW100-BRV324








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands