manualshive.com logo in svg

TRENDnet TW100-BRV324, User Manual

Share
Download
TRENDnet TW100-BRV324 User Manual Download Page 20

Broadband VPN Gateway User Guide 

16 

LAN Port Screen 

Use the 

LAN Port

 link on the main menu to reach the 

LAN Port

 screen. An example screen is shown below. 

 

Figure 9: LAN Port Screen 

Data - LAN Port Screen 

LAN 

LAN IP Address 

IP address for the Broadband VPN Gateway, as seen from the local 
LAN. Use the default value unless the address is already in use or your 
LAN is using a different IP address range. In the latter case, enter an 
unused IP Address from within the range used by your LAN. 

Subnet Mask 

The default value 255.255.255.0 is standard for small (class "C") 
networks. For other networks, use the Subnet Mask for the LAN 
segment to which the Broadband VPN Gateway is attached (the same 
value as the PCs on that LAN segment). 

DHCP Server 

•

 

If Enabled, the Broadband VPN Gateway will allocate IP Ad-
dresses to PCs (DHCP clients) on your LAN when they start up. 
The default (and recommended) value is Enabled. 

•

 

If you are already using a DHCP Server, this setting must be 
Disabled, and the existing DHCP server must be re-configured to 
treat the Broadband VPN Gateway as the default Gateway. See the 
following section for further details. 

•

 

The 

Start IP Address, Number of IP Address Pool, Client Side 

DNS 

and

 DHCP Lease Time

 fields set the values used by the 

DHCP server when allocating IP Addresses to DHCP clients. This 
range also determines the number of DHCP clients supported. 

See the following section for further details on using DHCP. 

Buttons 

Save 

Save the data on screen. 

Cancel 

The "Cancel" button will discard any data you have entered and reload 
the file from the Broadband VPN Gateway. 

Summary of Contents for TW100-BRV324








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands