TRENDnet TEW-658BRM User Manual Download Page 7

Page: 7 / 96

Hardware Overview

Front Panel

No. LED

Description

Power LED

•

Solid GREEN – Indicates normal operation.

•

Solid RED – Indicates malfunction.

•

Off – The device is powered off.

LAN 1, 2, 3, 4

•

Solid GREEN – Connected but no activity.

•

Flashing GREEN – Data transmission is in progress.

•

Off – No computer is connected.

Wireless

•

Solid GREEN – Connected but no activity.

•

Flashing GREEN – Data transmission is in progress.

•

Off – Wireless connection is disabled.

WPS

•

Solid GREEN – WPS-enabled device is connected.

•

Flashing GREEN – Searching for WPS-enabled devices.

•

Solid RED – No WPS-enabled device is connected.

•

Off – WPS is disabled.

DSL

•

Flashing GREEN – Attempts to synchronize with DSL line.

•

Solid GREEN – DSL line is synchronized.

•

Off – DSL connection is not present.

Internet

•

Solid GREEN – Internet is connected but no activity.

•

Flashing GREEN – Data transmission is in progress.

•

Solid RED – Internet connection failed.

•

Off – No internet connection.

Summary of Contents for TEW-658BRM

































































































Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands

TRENDnet TEW-658BRM, User Manual

Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands