TRENDnet TEW-658BRM User Manual Download

Page: 77 / 96

60.

Click the

Apply

button to save your changes or click the

Cancel

button to

discard your changes.

Time Schedule

This page allows you create desired time schedule.
To access the Time Schedule page, click

MAINTENANCE

Time Schedule

To create a new schedule, do the following:

61.

On the

Name

field, enter desired schedule name.

62.

Check the days to implement the schedule and select the time period.

63.

Click the

Add

button to save the schedule. The new entry is listed on the TIME

SCHEDULE LIST.

To delete a schedule, click the corresponding icon.

Firmware Upgrade

This page displays the current firmware version of your Modem Router and allows

you to install the upgrade.
To access the Firmware Upgrade page, click

MAINTENANCE

Firmware Upgrade

Summary of Contents for TEW-658BRM

































































































Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands

TRENDnet TEW-658BRM, User Manual

Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands