TRENDnet TEW-658BRM User Manual Download Page 58

Page: 58 / 96

Destination Start Port

and

Destination End Port

— Enter the starting and ending

port range of the destination of the packets.

ICMP Type

— Select an ICMP type from the drop-down list. If the selected type is

met, the filter is implemented.
Click the

Apply

button to save and activate the rule or click the

Cancel

button to

discard your changes.

Statistics

This page displays the filter and rule statistics.
To access the Statistics page, click

ADVANCED

Packet Filter

Statistics

or click the

Statistics

button.

Click the

Refresh

button to refresh the list.

Static Route

This page allows you to create routing tables.
To access the Static Route page, click

ADVANCED

Static Route

Click the

Add

button to create a static route.

Forwarding Policy Option

— Select whether to enable or disable routing.

Rule Name

— Enter desired rule name.

Source IP

— Enter the source IP address.

Source SubMask

— Enter the source subnet mask.

Dest IP

— Enter the destination IP address.

Dest SubMask

— Enter the destination subnet mask.

Summary of Contents for TEW-658BRM

































































































Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands

TRENDnet TEW-658BRM, User Manual

Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands