TRENDnet TEW-658BRM User Manual Download

Page: 44 / 96

Advanced-LAN

This page allows you to add multiple LAN IP addresses.
To access the Advanced-LAN page, click

Advanced

Advanced-LAN

Config Spanning Tree

Spanning Tree Enable

— Check this box to enable spanning tree.

Click the

Apply

button to save your changes or click the

Cancel

button to discard

your changes.

Add IP Interface

To add an IP interface, do the following:

22.

On the first record on the table, enter the

IP Address

and

Subnet Mask

23.

Check the

Enable

box to enable the IP interface.

24.

Click the

Add

button. The new entry is listed on the bottom of the list.

To apply the IP interface, click the corresponding

Apply

button.

To delete the IP interface, click the corresponding

Delete

button.

ADSL Settings

This page allows you to select ADSL modulations, capabilities, and other options.

Consult your ISP to determine the appropriate settings.
To access the ADSL Settings page, click

Advanced

ADSL Settings

Summary of Contents for TEW-658BRM

































































































Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands

TRENDnet TEW-658BRM, User Manual

Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands