TRENDnet TEW-658BRM User Manual Download Page 28

Page: 28 / 96

Bridge Mode

If you select Bridge mode (RFC-1483 Bridged), the screen below is displayed.

State of Connection

— Select whether to enable or disable this connection.

Name

— Enter your desired connection name.

CIP (RFC-1577)

If you select CIP (RFC-1577 Classic RP/ARP over ATM), the screen below is displayed.

State of Connection

— Select whether to enable or disable this connection.

Name

— Enter your desired connection name.

NAT

— Select whether to enable or disable NAT (Network Address Translation).

Enable this setting to share one WAN IP address with multiple computers on your

network.

External IP Address

— Enter the IP address provided by your ISP.

Subnet Mask

— Enter the subnet mask provided by your ISP.

Default Gateway

— Enter the default gateway provided by your ISP.

DNS Enabled

— Select whether to enable or disable DNS (Domain Name System).

DNS Override Allowed

— Select whether to enable or disable DNS override.

DNS Server 1

and

DNS Server 2

— If provided by your ISP, enter the DNS server.

Otherwise, leave these fields blank.

As system default route

— Check this box to set the current setting as the default

route.

Summary of Contents for TEW-658BRM

































































































Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands

TRENDnet TEW-658BRM, User Manual

Search results

Summary of Contents for TEW-658BRM

Reviews:

Related manuals for TEW-658BRM

Brands by name

Popular brands