Check a corresponding box to select the option.
To reset the ADSL settings, click the
Reset
button.
Click the
Apply
button to save your changes or click the
Cancel
button to discard
your changes.
RIP Settings
A Routing Information Protocol (RIP) is an Internet protocol that is used to share
routing information table with other routing devices on the local and wide area
network.
To access the RIP Settings page, click
Advanced
>
RIP Settings
.
To add RIP settings, do the following:
25.
Select the
Interface
.
26.
On the
Receive Mode
and
Send Mode
drop-down lists, select the appropriate
versions.
NOTE: The selected versions should match the versions supported by the
other routers on your network.
27.
Click the
Add
button.
To delete an RIP setting, click the corresponding button.
