Time Schedule
— Select a schedule when to use the virtual server or click the
New
Time Schedule
button to create a new schedule.
Click the
Apply
button to save your changes or click the
Cancel
button to discard
your changes.
Port Trigger
This page displays the port trigger settings on your network. Port triggering is a type
of port forwarding where outgoing data from specific ports are sent to specific
incoming ports.
To access the Port Trigger page, click
Advanced
>
NAT
>
Port Trigger
or click the
Port Trigger
button.
The table displays the port triggers on your network. To edit an entry, click the
corresponding icon. To delete an entry, click the corresponding button.
To add port triggers, click the
Add
button. The Port Trigger Config screen is
displayed.
Port Trigger
— Check this box to enable port triggering.
Rule Name
— Enter a rule name.
Use Interface
— Select a DSL interface from the drop-down list.
Trigger Port
— Enter the port that will trigger the device to open ports for incoming
data.
Trigger Port Protocol
— Select the trigger port protocol from the drop-down list.
Public Port
— Enter the public port to be opened.
Public Port Protocol
— Select the public port protocol.
Time Schedule
— Select a schedule to apply port triggering from the drop-down list
or click the
New
Time Schedule
button to create a new schedule.
