ICMP Reply Enable
— Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
Proxy ARP Enable
— Check this box to enable proxy ARP function.
Click the
Apply
button to save your changes or click the
Cancel
button to discard
your changes.
Wireless Settings
The Wireless Settings page allows you to enable and configure wireless connections.
Basic Setting
The Basic Settings page allows you to enable the wireless function of your Modem
Router and set its SSID.
To access the Basics Settings page, click
SETUP
>
Wireless Settings
>
Basic Setting
or
click the
Wireless Setting
button.
Device
— Check this box to enable the wireless function of your Modem Router.
SSID
– Enter the service set identifier (SSID) or the name of your wireless network.
The SSID is case-sensitive and must not exceed 32 alphanumeric characters.
BSSID
— (Basic Service Set Identifier) Displays the MAC address of your Modem
Router.
Wireless Channel
— Select the appropriate channel that corresponds to your
network settings. You should assign different channels for each access point to
avoid signal interference.
TIP: Select Auto for Wireless Channel to allow your Modem Router to select
the best possible channel for your wireless network.
