User Password
— Enter the password provided by your ISP. Re-enter the password
in the
Confirm Password
field.
Max MRU
— This is the maximum rate of cells that you can receive. If provided by
your ISP, enter the rate in the field. Otherwise, leave this field to its default setting.
DNS Enabled
— Select whether to enable or disable DNS (Domain Name System).
DNS Override Allowed
— Select whether to enable or disable DNS override.
DNS Server 1
and
DNS Server 2
— If provided by your ISP, enter the DNS server.
Otherwise, leave these fields blank.
PPPoE Service Name
— Enter a PPPoE service name.
MAC Address
— Displays the cloned MAC address. Click the
Clone Mac
button to
clone the MAC address of your computer.
PPPoE AC Name
— Enter the PPPoE account name provided by your ISP.
Connection Trigger
— You can configure how you want your Modem Router to
connect and terminate the Internet connection. Options are:
•
OnDemand
: Enables the Modem Router to cut off the Internet connection
after being idle for a specified period of time. The Modem Router
automatically re-establishes the connection when you try to access the
Internet again. On the
Idle Disconnect Time
field, enter the number of
seconds that you want to elapse before your Modem Router terminates
the Internet connection.
•
AlwaysOn
: Enables the Modem Router to be connected to the Internet at
all times. If you are disconnected, the Modem Router will automatically re-
establish the connection.
•
Manual
: With this setting, you have to enter the user name and password
to establish the Internet connection.
LCP Interval
— Enter the number of seconds that you want to be the interval in
sending LCP (Link Control Protocol) packets.
As system default route
— Check this box to set the current setting as the default
route.
ICMP Reply Enable
— Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
Proxy ARP Enable
— Check this box to enable proxy ARP function.
Click the
Apply
button to save your changes or click the
Cancel
button to discard
your changes.
