14
CODE/NAME
DESCRIPTION
SELECTION LIST
F17
Span Calibra-
tion
Places indicator into the span calibration routine. Scrolling down with
the ZERO key one level begins the procedure.
Press
ZERO
key
to begin sequence
F18
View Calibra-
tion
Actuates the function that allows you to view both the zero and span
calibration value. The values displayed in this function are valid only
after Calibration (F16 & F17) has been successfully completed. Scroll-
ing down with the
ZERO
key one level begins the procedure.
Press
ZERO
key
to begin sequence
F19
Key-in Zero
Allows you to key-in known zero calibration value in case of memory
loss in the field. Scrolling down with the
ZERO
key one level begins
the procedure.
Press
ZERO
key
to begin sequence
F20
Key-in Span
Allows you to key-in a known span calibration value in case of memory
loss in the field. Scrolling down with the
ZERO
key one level begins
the procedure.
Press
ZERO
key
to begin sequence
F21
Factory Reset
This sub-menu will reset all
parameters in the “F” and “A” menu to the
default settings. It will not overwrite any previously saved calibration
data. USE WITH CAUTION!
Press the
ZERO
key twice to exe-
cute
F23
Fine Tune
4-20 mA
Actuates the function that allows you to fine-tune the optional
4-20 mA analog output. Pressing the ZERO key to scroll down one
level begins the sequence.
Press the
ZERO
key to begin se-
quence
F24
Analog Output
Function
Selects the OPTIONAL active analog output function.
"oFF" = Off "4-20 nnA " = 4-20 mA "0
–10u " = 0–10V
oFF
4-20 nnA
0
–10u
F25
Set Point
Function
Selects the number and function of the set points and relay outputs.
See user’s guide for definitions
0 to 10
0
F26
Multi-interval
segments
Selects the number of weighing segments for multi-interval.
"0" = multi-interval is disabled
0
1
2
F27
No. of Scale
Divisions
(WS1)
Selects the number of scale divisions to be used for Weighing Seg-
ment 1 (WS1). Scrolling down with the ZERO key one level begins the
procedure.
Key-in
100 - 50000
1000
F28
No. of Scale
Divisions
(WS2)
Selects the number of scale divisions to be used for Weighing Seg-
ment 2 (WS2). Scrolling down with the ZERO key one level begins the
procedure.
Key-in
100 - 50000
5000
F29
Load Cell Input
Selects the load cell input source.
“AdC” = Internal A/D (cabled),
“1rAdIo” = One external wireless A/D module,
“2rAdIo” = Two external wireless A/D modules
AdC
1rAdIo
2rAdIo
