Transcell Technology P104210511TW, Installer Manual

Page: 22 / 31

21
13. Use the four directional keys to adjust the displayed value to the actual day value. Increase
the flashing digit by pressing the UNITS key. Decrease the flashing digit by pressing the
ZERO key. Pressing the TARE key or the PRINT key will change the position of the flashing
digit.
14. After entering the exact value, press the NET/GROSS key to save the value. The screen
displays “n¬_xx” where ‘xx’ is the current month of the year, e.g. “02”. One digit will be flash-
ing.
15. Use the four directional keys to adjust the displayed value to the actual month value. Increase
the flashing digit by pressing the UNITS key. Decrease the flashing digit by pressing the
ZERO key. Pressing the TARE key or the PRINT key will change the position of the flashing
digit.
16. After entering the exact value, press the NET/GROSS key to save the value. The screen
displays “yE_xx” where ‘xx’ is the current month of the year, e.g. “11”. One digit will be flash-
ing.
17. Use the four directional keys to adjust the displayed value to the actual year value. Increase
the flashing digit by pressing the UNITS key. Decrease the flashing digit by pressing the
ZERO key. Pressing the TARE key or the PRINT key will change the position of the flashing
digit.
18. After entering the exact value, press the NET/GROSS key to save the value and revert up to
the parameter level, e.g. ”A1-20”.
Diagnostics (A1-24)
Here is a brief description of each test mode:
A1-24-1 Display Test
– Lights up all display segments. End test manually by pressing the
NET/GROSS (Set) key.
A1-24-2 ADC Test
– Shows internal A/D converter counts – useful for troubleshooting weigh-
ing issues. End test manually by pressing the NET/GROSS (Set) key. The Zero key works in
this mode.
A1-24-5 Serial Test
– Transmits a data string continuously out both serial ports (“TEST1” on
COM1 and “TEST2” on COM2). End test manually by pressing the NET/GROSS (Set) key.
A1-24-6 Keyboard Test
– Displays a keycode for each key pressed on the keypad. See
Table below. End test manually by pressing the NET/GROSS (Set) key.
Key Keycode
Units 1
Zero 2
Net/Gross EXIT
Tare 4
Print 5