13
CODE/NAME
DESCRIPTION
SELECTION LIST
F4
Zero Range
Selects the range within which the scale will accept a front panel
ZERO command. Note that the scale must be in standstill to automat-
ically zero. Selections are in display % of full scale. Pressing the
ZERO
key to scroll down one level begins the sequence.
100
1.9
2
20
F5
Motion Band
Sets the level at which motion is detected. If motion is not detected,
the scale can process a Print or Zero command. Maximum value varies
depending on local regulations. Expressed as scale divisions per sec-
ond (d/s). Pressing the
ZERO
key to scroll down one level begins the
sequence
Key-in
0.0
– 32.0
1.0
F6
Digital Filter
Averages weight readings to produce higher stability. Choose the
speed that works best for your application.
"AUto" = Automatic, FIr = FIR (
finite impulse response),
“Avg-xx” = Averaging Filter
Auto
Flr
01, 04, 08, 16, 24,
32, 40, 48, 56, 64
F7
Overload Limit
Selects the desired formula which determines the point at which the
indicator shows overload. All selections are based on the primary unit
selected in F8.
"FS" = Full scale capacity.
FS
FS + 2%
FS + 5%
FS + 1d
FS + 9d
F8
Calib. Unit
Selects the primary base unit to be used in the calibration process and
the default unit for normal operation.
"1" = primary unit is lb "2" = primary unit is in kg
1
2
F9
Display
Divisions
Determines the desired weight increments. Value should be consistent
with legal requirements.
1
2
5
F10
Decimal Point
Determines location of the decimal point.
0
00
0.0000 0.000
0.00 0.0
F11
No. of L/C
wires
Selects the number of wires on the load cell(s) to be connected to the
indicator. Cabled systems only.
"4" = four wires "6" = six wires (SENSE)
4
6
F12
Enable lb-oz
display
Allows you to enable or disable lb-oz display
"1" = lb-oz is enabled "0" = lb-oz is disabled
0
1
F14
Power-on zero
(IZSM)
Allows you to enable or disable power-on zero. (IZSM); max is 20%
of FS
"1" = IZSM is enabled "0" = IZSM is disabled
0
1
F15
Third unit se-
lection
Allows you to choose (select) the third unit of measure
"0" = third unit disabled "1" = grams (g)
"2" = ounces (oz)
0
1
2
F16
Zero Calibra-
tion
Places indicator into the zero-calibration routine. Scrolling down with
the ZERO key one level begins the procedure.
Press
ZERO
key
to begin sequence
