22
Entering the COM2
(“A2”) Menu
1. Press and hold the MENU/OFF key to switch off the digital indicator.
2. Press and hold the ON key until the digital indicator beeps and starts to boot up.
3.
During the countdown phase (“555555, 444444”, etc.) press and hold the MENU/OFF key
until the “Set?” message is displayed.
4. Press the NET/GROSS button
while “Set?” is being displayed. The digital indicator displays
“- F – “.
5. Press the PRINT (right) key twice
. The screen displays “-A2-”.
6. Scroll down using the ZERO (down) key
to reach the parameter level. The scale shows “A2-
1”.
7. Move from
one “A2” parameter to the next by using the TARE (left) or PRINT (right) keys. For
example, to go from A2-1 to A2-2, press the PRINT key. To go from A2-2 back to A2-1, press
the TARE key.
8.
Once you have arrived at the proper “A2” menu parameter, e.g. ”A2-1”, press the
ZERO (down) key once to arrive at the selection level. The scale displays the current param-
eter setting.
9. If there is a selection list, scroll thru the available parameter settings, use the TARE (left) or
PRINT (right) keys. Otherwise, use the arrow keys to adjust the displayed value to the new
value.
10.
Once the setting you want is displayed on the screen, press the NET/GROSS (set) key to
save this value and revert
up to the parameter level, e.g. ”A2-1”.
COM2
(“A2”) Menu Descriptions
This section provides more detailed descriptions of the selections found in the User Menu Chart.
Factory-set defaults are shown in
bold
with a checkmark;
(
√)
.
CODE/NAME
DESCRIPTION
SELECTION LIST
A2-1
Baud Rate
Selects the baud rate for data transmission through the serial port.
1200, 2400, 4800,
9600
, 19200,
38400, 57600,
115200
A2-2
Data Bits,
Parity and
Stop Bits
Selects the number of data bits and parity of serial transmission.
"8 n" = 8 data bits with no parity bit and one stop bit
"7 o" = 7 data bits with odd parity bit and one stop bit
"7 E" = 7 data bits with even parity bit and one stop bit
"7 n" = 7 data bits with no parity bit and two stop bits
8 n
7 o
7 E
7 n
A2-3
Serial Port
Mode
Selects the mode of the serial port: Refer to Appendix B for more in-
formation.
"0" = Demand Full Duplex
"1" = Continuous Full Duplex
“2” = Auto Print
“3” = RFID
“4” = Test and Measurement
“5” = Test and Measurement (Bird dog)
0
1
2
3
4
5
