Transcell Technology P104210511TW, Installer Manual

Page: 17 / 31

16
CODE/NAME DESCRIPTION SELECTION LIST
F37
Min. Hold
Weight
Sets the minimum weight that can be captured and held; expressed
in display divisions (d). If F35 is set to “0”, this function does nothing.
1, 2, 5

, 10, 20,
50, 100, 200, 500,
1000
F50
FIR Filter
Parameters F50-1 to F50-7 are used to configure the FIR (finite im-
pulse response) filter.
F50-1
FIR Window
Sets the Window Function of the FIR filter.
“HAnnInG” =
Hanning (Hann),
“HA InG” =
Hamming ,
“blAC_” =
Blackman
HAnnInG

HA InG
blAC_
F50-2
FIR Type
Sets the FIR filter type. Choose this one first.
“LPASS” = Low Pass, “HPASS” = High Pass,
“bdPASS” = Band Pass
LPASS

HPASS
bdPASS
F50-3
FIR No. of
Taps
Selects the number of taps (filter depth) of the FIR filter. The larger
the number, the slower the response. Key-in
1 - 99
29

F50-4
FIR Cutoff Fre-
quency
Sets the cutoff frequency for both Low Pass and High Pass FIR
types. Value must be less than or equal to one-half the F2 (sampling
rate) setting. Key-in
1
– F2 ÷ 2
5

F50-5
FIR Lower Cut-
off Frequency
Sets the lower cutoff frequency for the Band Pass FIR type. Value
must be less than or equal to one-half the F2 (sampling rate) setting. Key-in
1
– F2 ÷ 2
1

F50-6
FIR Upper Cut-
off Frequency
Sets the upper cutoff frequency for the Band Pass FIR type. Value
must be greater than F45 setting. Key-in
1
– F2 ÷ 2
2

F50-7
Post FIR Filter
Sets the post-FIR averaging filter.
“0” = Disabled
0 1
2
3

F51
Auto Digital
Filter
Parameters F51-1 to F51-4 are used to configure the Automatic digi-
tal filter.
F51-1
Auto Digital
Filter - Max
Configures the Automatic digital filter (F6 = AUto). Maximum number
of readings to be averaged. Choose the setting that works best for
your application.
32

, 64, 80,
96, 128
F51-2
Auto Digital
Filter - Min
Configures the Automatic digital filter (F6 = AUto). Minimum number
of readings to be averaged. Choose the setting that works best for
your application.
1

, 8, 16, 24, 32
F51-3
Auto Digital
Filter
– Primary
Band
Configures the Automatic digital filter (F6 = AUto). Primary band ex-
pressed in A/D counts. Choose the setting that works best for your
application.
500

, 1000,
2000, 3000, 4000,
5000, 6000, 7000