20
CODE/NAME
DESCRIPTION
SELECTION LIST
A1-26-1
Low Battery
Detection
Select low battery detection mode
.
"0" = Disabled
"1" = Enabled
0
1
A1-26-2
No. of
Batteries
Selects the number of rechargeable batteries.
“b2 – 7.4” = 3.7V x 2 batteries (7.4V)
“b4 – 14.8” = 3.7V x 4 batteries (14.8V)
b2
– 7.4
b4
– 14.8
A1-26-3
Battery Count -
Read
Allows you to read the battery count. Pressing the
ZERO
key to scroll
down one level begins the sequence.
Press
ZERO
key
to begin sequence
A1-26-4
Battery Count -
Edit
Allows you to edit the battery count. Pressing the
ZERO
key to scroll
down one level begins the sequence.
Press
ZERO
key
to begin sequence
A1-26-5
Battery Count -
Reset
Allows you to reset the battery count. Pressing the
ZERO
key to
scroll down one level begins the sequence.
Press
ZERO
key
to begin sequence
Setting system time and date (A1-20)
1. Press and hold the MENU/OFF key to switch off the digital indicator.
2. Press and hold the ON key until the digital indicator beeps and starts to boot up.
3.
During the countdown phase (“555555, 444444”, etc.) press and hold the MENU/OFF key
until the “Set?” message is displayed.
4. Press the NET/GROSS button
while “Set?” is being displayed. The digital indicator displays
“- F – “.
5. Press the PRINT
(right) key once. The screen displays “-A-”.
6. Scroll down
using the
ZERO (down) key
to reach the parameter level.
The scale shows “A1-1”.
7. Move from A1-1 to A1-20 by pressing the TARE (left) key repeatedly until the screen shows
“A1-20”.
8. Once you have arrived at A1-20 press the ZERO (down) key once. The screen displays
“ho_xx” where ‘xx’ is the current hour, e.g. “15”. One digit will be flashing.
9. Use the four directional keys to adjust the displayed value to the actual hour value. Increase
the flashing digit by pressing the UNITS key. Decrease the flashing digit by pressing the
ZERO key. Pressing the TARE key or the PRINT key will change the position of the flashing
digit.
10. After entering the exact value, press the NET/GROSS key to save the value. The screen
displays “n¬_xx” where ‘xx’ is the current minute, e.g. “55”. One digit will be flashing.
11. Use the four directional keys to adjust the displayed value to the actual minute value. Increase
the flashing digit by pressing the UNITS key. Decrease the flashing digit by pressing the
ZERO key. Pressing the TARE key or the PRINT key will change the position of the flashing
digit.
12. After entering the exact value, press the NET/GROSS key to save the value. The screen
displays “dA_xx” where ‘xx’ is the current day of the month, e.g. “14”. One digit will be flashing.
