18
8. Once you have arrived at the proper
“A1” menu parameter, e.g. ”A1-1”, press the
ZERO (down) key once to arrive at the selection level. The scale displays the current param-
eter setting.
9. If there is a selection list, scroll thru the available parameter settings, use the TARE (left) or
PRINT (right) keys. Otherwise, use the arrow keys to adjust the displayed value to the new
value.
10.
Once the setting you want is displayed on the screen, press the NET/GROSS (set) key to
save this value and revert up t
o the parameter level, e.g. ”A1-1”.
User/COM1
(“A1”) Menu Descriptions
This section provides more detailed descriptions of the selections found in the User Menu Chart.
Factory-set defaults are shown in
bold
with a checkmark;
(
√)
.
CODE/NAME
DESCRIPTION
SELECTION LIST
A1-1
Baud Rate
Selects the baud rate for data transmission through the serial port.
1200, 2400, 4800,
9600
, 19200,
38400, 57600,
115200
A1-2
Data Bits,
Parity and
Stop Bits
Selects the number of data bits and parity of serial transmission.
"8 n" = 8 data bits with no parity bit and one stop bit
"7 o" = 7 data bits with odd parity bit and one stop bit
"7 E" = 7 data bits with even parity bit and one stop bit
"7 n" = 7 data bits with no parity bit and two stop bits
8 n
7 o
7 E
7 n
A1-3
Serial Port
Mode
Selects the mode of the serial port: Refer to Appendix B for more in-
formation.
"0" = Demand Full Duplex
"1" = Continuous Full Duplex
“2” = Auto Print
“4” = Test and Measurement
0
1
2
4
A1-4
MP-20 Print
Header
Tells MP-20 printer to print the header information. Valid only when
Ax-6
is set to “2” or “4”.
"0" = Do NOT Print Header "1" = Print Header
0
1
A1-5
Units Key
Selects function of the Units key.
"0" = Disabled
"1" = Enabled
0
1
A1-6
Output String
Selects fixed output string for serial port. Refer to Appendix B for de-
tails. Left off here
"0" = String Format 1 (Condec Demand)
"1" = String Format 2 (Condec Continuous)
"2" = Text Print Ticket
“3” = Text Print Ticket with MP-20 Auto Label Feed
0
1
2
3
A1-7
ID Number
Selects the ID number mode.
"0" = Disabled
"1" = Enabled
0
1
