Trane VarioTrane TR1 2800 Series, Operating Instructions Manual

Page: 14 / 137

Disconnect mains voltage. Hold the [QUICK MENU] + [+] + [CHANGE DATA] keys down while simultaneously
reconnecting the mains voltage. Release the keys; the frequency converter has now been programmed for the
factory setting.
In normal operation, one item of operating data can
be displayed continuously at the operator's own
choice. By means of the [+/-] keys the following op-
tions can be selected in Display mode:
- Output frequency [Hz]
- Output current [A]
- Output voltage [V]
- Intermediate circuit voltage [V]
- Output power [kW]
- Scaled output frequency f out x p008
In order to enter the Menu mode [QUICK MENU] + [+]
must be activated at the same time.
In Menu mode, most of the frequency converter pa-
rameters can be changed. Scroll through the param-
eters using the [+/-] keys. While scrolling in the M enu
mode proceeds, the parameter number will flash.
The display shows that the setting in parameter 102
Motor power P M,N is 0.75. In order to change the value
of 0.75, [CHANGE DATA] must first be activated; the
parameter value can then be changed using the [+/-]
keys.
If for a given parameter the display shows three dots
at the right, it means that the parameter value has
more than three digits. In order to see the value, ac-
tivate [CHANGE DATA].
TR1 2800 Series VFD 13
Manual Initialisation
Display Readout States
Display mode
Menu mode
Introduction to TR1 2800 Series VFD