Trane VarioTrane TR1 2800 Series, Operating Instructions Manual

Page: 20 / 137

007 LCP copy
Value:
No copying (NO COPY) [0]
Upload all parameters (UPL. ALL PAR.) [1]
Download all parameters (DWNL. ALL PAR.) [2]
Download size-independent parameters
(DWNL.OUTPIND.PAR.)
[3]
Function:
Parameter 007 LCP copy is used if you want to use the
LCP 2 control panel's integral copy function. The
function is used if you want to copy all parameter
setups from one adjustable frequency drive to anoth-
er by moving the LCP 2 control panel.
Description of choice:
Select
Upload all parameters
[1] if you want all param-
eter values to be transferred to the control panel.
Select
Download all parameters [2] if all parameter val-
ues transferred are to be copied to the adjustable
frequency drive to which the control panel is attach-
ed. Select
Download size-independent par. [3] if you
only want to downloade the size-independent param-
eters. This is used when downloading to a adjustable
frequency drive with a different rated power size than
that from which the parameter setup originates.
NOTE:
Upload/download can only be performed in stop
mode. Download can only be performed to a adjust-
able frequency drive with the same software version
number, see parameter 626
Database identification no.
008 Display scaling of output frequency
Value:
0.01 - 100.00
1.00
Function:
In this parameter, the factor is selected by which the
output frequency is to be multiplied. The value is
shown in the display, provided parameters 009-012
Display readout have been set to Output frequency x
scaling
[5].
Description of choice:
Set the required scaling factor.
009 Large display readout
Value:
No readout (none) [0]
Resulting reference [%]
(reference
[%]) [1]
Resulting reference [unit]
(reference
[unit]) [2]
Feedback [unit] (feedback [unit]) [3]
Frequency [Hz] (Frequency [Hz]) [4]
Output frequency x scaling
(frequency
x scale) [5]
Motor current [A] (Motor current [A]) [6]
Torque [%] (Torque [%]) [7]
Power [kW] (Power [kW]) [8]
Power [HP] (Power [HP][US]) [9]
Motor voltage [V]
(Motor
voltage [V]) [11]
DC link voltage [V]
(DC
link voltage [V]) [12]
Thermal load motor [%]
(Motor
thermal [%]) [13]
Thermal load [%]
(FC.
thermal[%]) [14]
Running hours [Hours]
(RUNNING
HOURS]) [15]
Digital input [Bin]
(Digital
input[bin]) [16]
Analog input 53 [V]
(analog
input 53 [V]) [17]
Analog input 60 [mA]
(analog
input 60 [mA]) [19]
Pulse reference [Hz]
(Pulse
ref. [Hz]) [20]
External reference [%]
(external
ref. [%]) [21]
Status word [Hex] (Status word [hex]) [22]
Heatsink temperature [ ° C]
(Heatsink temp [°C]) [25]
Alarm word [Hex] (Alarm word [hex]) [26]
Control word [Hex] (Control word [Hex]) [27]
Warning word [Hex]
(warning
word [Hex]) [28]
Extended status word [Hex]
(Ext.
status [hex]) [29]
Communication option card warning
(COMM OPT WARN [HEX])
[30]
Pulse count
(PULSE
COUNTER) [31]
Function:
In this parameter you can select the data value that
you wish to display in the LCP control unit display line
2 when the frequency converter is switched on. The
display will also be included in the scrollbar in display
mode. In parameters 010-012
Display readout
you can
select a further three data values, which are displayed
in display line 1.
Description of choice:
No readout can only be selected in parameters
010-012
Small display readout
.
Resulting reference [%] gives, as a percentage, the re-
sulting reference in the range from Minimum refer-
ence, Ref MIN to Maximum reference, Ref MAX.
Reference [unit] gives the resulting reference with unit
Hz in Open loop . In Closed loop the reference unit is
selected in parameter 416 Process units .
TR1 2800 Series VFD 19
Programming