Trane VarioTrane TR1 2800 Series, Operating Instructions Manual

Page: 125 / 137

PNU # Parameter description Factory setting 4-setup Conv.
index
Data-
type
100 Configuration Speed reg., open loop Yes 0 5
101 Torque characteristics Torque Medium Yes 0 5
102 Motor power PM,N 1.1 kW Yes 1 6
103 Motor voltage UM,N 460 V Yes 0 6
104 Motor frequency f M,N 60 Hz Yes 0 6
105 Motor current IM,N 2.7 A Yes -2 7
106 Rated motor speed 1140 Yes 0 6
107 Automatic motor adjustment Optimisation off Yes 0 5
108 Stator resistance RS depends on motor selected Yes -3 7
109 Stator reactance XS depends on motor selected Yes -2 7
117 Resonance damping OFF Yes 0 6
119 High start torque 0.0 sec Yes -1 5
120 Start delay 0.0 sec Yes -1 5
121 Start function Coasting during start delay
time
Yes 0 5
122 Function at stop Coast Yes 0 5
123 Min. freq. for activation of
par. 122 0.1 Hz Yes -1 5
126 DC braking time 0 sec. Yes -1 6
127 DC brake engaging frequency OFF Yes -1 6
128 Thermal motor protection ETR Trip 1 Yes 0 5
130 Start frequency 0.0 Hz Yes -1 5
131 Voltage at start 0.0 V Yes -1 6
132 DC brake voltage 0% Yes 0 5
133 Start voltage depends on unit Yes -2 6
134 Load compensation 100 % Yes -1 6
135 U/f-ratio depends on unit Yes -2 6
136 Slip compensation 0 % Yes -1 3
137 DC hold voltage 0% Yes 0 5
138 Brake cut out value 3.0 Hz Yes -1 6
139 Brake cut in frequency 3.0 Hz Yes -1 6
140 Current, minimum value 0% Yes 0 5
142 Leak reactance depends on motor selected Yes -3 7
143 Internal ventilator control Automatic Yes 0 5
144 AC brake factor 1.30 Yes -2 5
146 Reset voltage vector Off Yes 0 5
124 TR1 2800 Series VFD
All about TR1 2800 Series VFD