Configuring DHCP Service
DHCP Server Configuration
User Guide
549
Step 6
dns-server
dns-server-list
(Optional) Specify the DNS server of the DHCP server pool. In general, you can configure
the IP address of the VLAN interface as the DNS server address.
dns-server-list
: Specify the IP address of the DNS server. You can specify up to 8 DNS
servers for each DHCP server pool.
Step 7
netbios-name-server
NBNS-list
(Optional) Specify the NetBIOS name server. You can specify up to 8 NetBIOS servers for
each DHCP server pool.
When a DHCP client uses the Network NetBIOS (Basic Input Output System) protocol for
communication, the host name must be mapped to IP address. NetBIOS name server can
resolve host names to IP addresses.
NBNS-list
: Specify the IP address of the NetBIOS server. You can specify up to 8 NetBIOS
servers for each DHCP server pool.
Step 8
netbios-node-type
type
(Optional) Specify the NetBIOS type for the clients, which is the way of inquiring IP address
resolution.
type
: Specify the NetBIOS type. The following options are provided:
b-node
: The client sends query messages via broadcast.
p-node
: The client sends query messages via unicast.
m-node
: The client sends query messages via broadcast first. If it fails, the client will try
again via unicast.
h-node
: The client sends query messages via unicast first. If it fails, the client will try again
via broadcast.
Step 9
next-server
ip-address
(Optional) Specify the IP address of a TFTP server for the clients. If needed, the clients can
get the configuration file from the TFTP server for auto installation.
ip-address
: Specify the IP address of the TFTP server.
Step 10
domain-name
domainname
(Optional) Specify the domain name that the clients should use when resolving host names
via DNS.
domainname
: Specify the domain name with up to 200 characters.
Step 11
bootfile
file-name
(Optional) Specify the name of the bootfile. If needed, the clients can get the bootfile from
the TFTP server for auto installation.
file-name
: Specify the bootfile name with up to 128 characters.
Step 12
show ip dhcp server pool
Verify the configuration of the DHCP server pool.
Step 13
end
Return to Privileged EXEC Mode.
Summary of Contents for JetStream T2600G-28TS
