TP-Link JetStream T2600G-28TS, User Manual

Page: 57 / 1136

User Guide 28
Managing System System Info Configurations
Current System
Time
Displays the current date and time of the switch.
Current Time
Source
Displays how the switch gets the current time.
In the Time Config section, follow these steps to configure the system time:
1) Choose one method to set the system time and specify the related parameters.
Manual Set the system time manually.
Date : Specify the date of the system.
Time : Specify the time of the system.
Get Time from
NTP Server
Get the system time from an NTP server. Make sure the NTP server is accessible
on your network. If the NTP server is on the internet, connect the switch to the
internet first.
Time Zone : Select your local time zone.
Primary Server : Enter the IP Address of the primary NTP server.
Secondary Server : Enter the IP Address of the secondary NTP server. Once the
primary NTP server is down, the EAP can get the system time from the secondary
NTP server.
Update Rate : Specify the interval the switch fetching time from NTP server, which
ranges from 1 to 24 hours.
Synchronize
with PC’s Clock
Synchronize the system time with the clock of your currently logged-in host.
2) Click Apply .
2.1.4 Configuring the Daylight Saving Time
Choose the menu SYSTEM > System Info > Daylight Saving Time to load the following
page.
Figure 2-7 Configuring the Daylight Saving Time
Follow these steps to configure Daylight Saving Time:
1) In the
DST Config section, enable the Daylight Saving Time function.