manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 688

CHASSIS

669

TYPES OF TIRES

Determine what kind of tires your vehicle is originally
equipped with.

1.

Summer tires

Summer tires are high-speed capability tires best
suited to highway driving under dry conditions.

Since summer tires do not have the same traction
performance as snow tires, summer tires are
inadequate for driving on snow-covered or icy roads.
For driving on snow-covered or icy roads, we
recommend using snow tires.  If installing snow tires,
be sure to replace all four tires.

2.

All season tires

All season tires are designed to provide better traction
in snow and to be adequate for driving in most winter
conditions, as well as for use all year round.

All season tires, however, do not have adequate
traction performance compared with snow tires in
heavy or loose snow.  Also, all season tires fall short
in acceleration and handling performance compared
with summer tires in highway driving.

The details about how to distinguish summer tires
from all season tires are described on page 660.

CAUTION

Do not mix summer and all season tires on
your vehicle as this can cause dangerous
handling characteristics, resulting in loss of
control.

Do not use tires other than the manufacturer’s
designated tires, and never mix tires or
wheels of the sizes different from the
originals.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands