manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 541

DRIVING TIPS

522

Do not drive in excess of the speed limit.  Even if the
legal speed limit permits it, do not drive over 140 km/h
(85 mph) unless your vehicle has high-speed
capability tires.  Driving over 140 km/h (85 mph) may
result in tire failure, loss of control and possible
injury.  Be sure to consult a tire dealer to determine
whether the tires on your vehicle are  high-speed
capability tires or not before driving at such speeds.

Do not continue normal driving when the brakes are
wet.  If they are wet, your vehicle will require a longer
stopping distance, and it may pull to one side when
the brakes are applied.  Also, the parking brake will
not hold the vehicle securely.

Vehicles with electronically modulated air
suspension: If you drive through water, such as when
crossing swallow streams, first check the depth of
the water and the bottom of the river bed of firmness,
put the vehicle height in the “HI” (high) mode with the
height select switch and then turn off the
electronically modulated air suspension by pushing
the height control switch.  Drive your vehicle at 30
km/h (19 mph) or lower speed.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands