manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 588

IN CASE OF AN EMERGENCY

569

NOTICE

Ensure that there is no object caught between
the tire and the vehicle underbody.
Otherwise, the wheel may fly forward during
a collision or sudden braking.

Tighten the spare tire clamp bolt to hold the
spare wheel carrier by the hook securely.

This is the same procedure for changing or rotating
your tires.

CAUTION

Before driving, make sure all the tools, jack and
flat tire are securely in place in their storage
location to reduce the possibility of personal
injury during a collision or sudden braking.

IF YOUR VEHICLE BECOMES

STUCK

If your vehicle becomes stuck in snow, mud, sand, etc.,
then you may attempt to rock the vehicle free by moving
it forward and backward.

Two-wheel  drive models — Turn off the traction control
system to become unstuck to allow the tires to spin
enough to remove the vehicle from the obstruction.  (For
details, see “Traction control system” on page 499.)

CAUTION

Do not attempt to rock the vehicle free by moving it
forward and backward if people or objects are anywhere
near the vehicle.  During the rocking operation the
vehicle may suddenly move forward or backward as it
becomes unstuck, causing injury or damage to nearby
people or objects.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands