manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 606

IN CASE OF AN EMERGENCY

587

1

Lexus Link System indicator light (green or amber)

2

Lexus Link System warning light (red)

When the ignition is turned to the “ON” position, the warning
light (red) should come on for a few seconds, and go off.  The
indicator light (amber) comes on for a few seconds and the
color of the indicator changes from amber to green.  This
means the Lexus Link System is operating properly.  The green
indicator light should remain on to inform you that you have an
active subscription.  If your Lexus Link subscription has
expired, the green indicator light should go off.  To activate your
Lexus Link System, press the “SERVICES” button.  To learn
more about your subscription status or how to renew or extend
your subscription, please push the “SERVICES” button to
speak to a Lexus Link Advisor, or you may dial toll free
1-800-25  Lexus (Toll-Free) (1-800-255-3987) and select
the option for Lexus Link.  If problems are detected in the Lexus
Link System, you will hear “A Lexus Link System error has
been detected.  Please contact your Lexus dealer.”  The
warning light should come on.  If you hear this message, take
your vehicle to your Lexus dealer.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands