Toyota Lexusc, Owner'S Handbook Manual

Page: 674 / 749

CHASSIS
655
CHECKING POWER STEERING
FLUID
The power steering fluid reservoir is located under the
engine compartment cover. Before checking the power
steering fluid, remove the cover. (For details, see
“Removing the engine compartment cover” on page 620.)
Check the fluid level through the reservoir. If necessary,
add automatic transmission fluid DEXRON
II or III .
If the vehicle has been driven around 80 km/h (50 mph) for 20
minutes (a little more in frigid temperatures), the fluid is hot
(60
C — 80 C or 140 F — 175 F). You may also check the
level when the fluid is cold (about room temperature, 10 C —
30 C or 50 F — 85 F) if the engine has not been run for about
five hours.
1 If cold O.K. 2 If cold add 3 If hot O.K.
4 If hot add
Clean all dirt off the reservoir and look at the fluid level. If the
fluid is cold, the level should be in the “COLD” range. Similarly,
if it is hot, the fluid level should be in the “HOT” range. If the
level is at the low side of the appropriate range, add automatic
transmission fluid DEXRON
II or III to bring the level within
the range.
To remove the reservoir cap, turn it counterclockwise and lift
up. To reinstall it, turn it clockwise. After replacing the reservoir
cap, visually check the steering box case, vane pump and hose
connections for leaks or damage.