manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 115

GAUGES, METERS AND SERVICE REMINDER INDICATORS

96

If either of the following conditions occurs, this indicates
a malfunction somewhere in the components monitored
by the warning light system. Contact your Lexus dealer as
soon as possible to service the vehicle.

The light does not come on when the ignition key is turned
to the “ON” position, or remains on.

The light comes on while you are driving.

A warning light turning on briefly during operation does not
indicate a problem.

CAUTION

If the “ABS” warning light remains on together with the
brake system warning light, immediately stop your
vehicle at a safe place and contact your Lexus dealer.

In this case, not only the anti-lock brake system will fail
but also the vehicle will become extremely unstable
during braking.

(j)

Open Door Warning Light and Buzzer

This light remains on until all the side doors and back door are
completely closed.

The light consists of a base light (shape of the vehicle) and 5
separate lights.  Each light indicates which door is open.

If the vehicle speed rises above 5 km/h (3 mph) with any door
open, the buzzer will sound and the light keeps flashing until
the door is closed.

(k) Rear Light Failure Warning Light

If this light comes on when the headlight switch is turned on (at
the first or second clickstop), it indicates that one or more of the
tail lights are burned out.

Have defective bulbs replaced as soon as possible.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands