manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 534

STARTING AND DRIVING

515

4. With the vehicle stopped, push the reset switch on the left
lower instrument panel and hold it until the low tire pressure
warning light blinks three times.

Initialization is completed after driving at the speeds of 30 km/h
(19 mph) or over for about a few hours total, when the tire
pressure warning system detects the normal tire pressure.  If
the following driving conditions are satisfied, initialization will
be completed in about one hour.

Vehicle speed varies between 30 km/h (19 mph) and 80
km/h (50 mph)

Normal road surface

When the warning light blinks every 0.25 seconds while
driving, you may be unable to reset the system.  In this case,
set the system again according to the above procedure.

Do not push the reset switch without adjusting the tire inflation
pressure to the specified level.  Otherwise, the low tire
pressure warning light may not come on even if the tire
pressure is low, or it may come on when the tire inflation
pressure is actually normal.

If you push the reset switch while the vehicle is moving,
initialization is not performed.

If the low tire pressure warning light does not blink when you
push and hold the reset switch, have the low pressure warning
system checked at your Lexus dealer.

BRAKE PAD WEAR LIMIT

INDICATORS

The brake pad wear limit indicators on your disc brakes
give a warning noise when the brake pads are worn to the
extent that replacement is required.

If you hear a squealing or scraping noise while driving, have the
brake pads checked and replaced by your Lexus dealer as
soon as possible.  Expensive rotor damage can result if the
pads are not replaced when needed.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands