manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 244

OCCUPANT RESTRAINT SYSTEMS

225

CAUTION

For effective protection in automobile accidents and
sudden stops, a child must be properly restrained,
using a seat belt or child restraint system depending
on the age and size of the child.  Holding a child in
your arms is not a substitute for a child restraint
system.  In an accident, the child can be crushed
against the windshield, or between you and the
vehicle’s interior.

Lexus strongly urges use of a proper child restraint
system which conforms to the size of the child,
installed on the rear seat.  According to accident
statistics, the child is safer when properly restrained
in the rear seat than in the front seat.

Never install a rear-facing child restraint system on
the front passenger seat even if the “AIRBAG OFF”
indicator light is illuminated.  In the event of an
accident, the force of the rapid inflation of the front
passenger airbag can cause death or serious injury
to the child if the rear-facing child restraint system is
installed on the front passenger seat.

Only when it is unavoidable should a forward-facing
child restraint system be installed on the front
passenger seat.  Always move the seat as far back as
possible even if the “AIRBAG OFF” indicator light is
illuminated, because the front passenger airbag
could inflate with considerable speed and force.
Otherwise, the child may be killed or seriously
injured.

On vehicles with side airbags and curtain shield
airbags, do not allow the child to lean his/her head or
any part of his/her body against the door or the area
of the seat, front or rear pillar or roof side rail from
which the side airbags or curtain shield airbags
deploy even if the child is seated in the child restraint
system.  It is dangerous if the side airbags and curtain
shield airbags inflate, and the impact could cause
death or serious injury to the child.

Do not use the seat belt extender when installing a
child restraint system on the front or rear passenger
seat.  If installing a child restraint system with the
seat belt extender connected to the seat belt, the seat
belt will not securely hold the child restraint system,
which could cause death or serious injury to the child
or other passengers in the event of collision.

Make sure you have complied with all installation
instructions provided by the child restraint
manufacturer and that the system is properly
secured.  If it is not secured properly, it may cause
death or serious injury to the child in the event of a
sudden stop or accident.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands