manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 160

EXTERIOR EQUIPMENT

141

HOOD

1. To open the hood, pull the hood lock release lever under
the driver-side instrument panel.  The hood will spring up
slightly.

2. Insert your fingers under the hood, push up the
auxiliary catch lever and lift the hood.

Before closing the hood, check to see that you have not
forgotten any tools, rags, etc.  Then lower the hood and make
sure it locks.

CAUTION

Before driving, be sure that the hood is closed and
securely locked.  Otherwise, the hood may open
unexpectedly while driving and an accident may occur.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands