manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 310

AIR CONDITIONING

291

(e) Checking and replacing the air conditioning

filter

The air conditioning filter information label is placed in the
glove box as shown and indicates that a filter has been
installed.

The air conditioning filter prevents dust from entering the
vehicle through the air conditioning vent.

The air conditioning filter is behind the glove box.

The air conditioning filter may clog after long use.  The filter
may need to be replaced if the air flow of the air conditioner and
heater experiences extreme reductions in operating efficiency,
or if the windows become to fog up easily.

If the symptoms of air conditioning efficiency problems occur,
contact your nearest Lexus dealer to have the filter checked
and replaced.

To maintain the air conditioning efficiency, inspect and replace
the air conditioning filter according to the maintenance
schedule.  In dusty areas or areas with heavy traffic flow such
as inner city or desert areas, early replacement may be
required.  (For scheduled maintenance information, please
refer to the “Owner’s Manual Supplement / Scheduled
Maintenance”.)

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands