manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 562

DRIVING TIPS

543

CAUTION

Do not exceed 72 km/h (45 mph) or the posted towing
speed limit, whichever is lower.  Because instability
(swaying) of a towing vehicle-trailer combination
usually increases as the speed increases, exceeding
72 km/h (45 mph) may cause loss of control.

Slow down and downshift before descending steep
or long downhill grades.  Do not make sudden
downshifts.

Avoid holding the brake pedal down too long or too
frequently.  This could cause the brakes to overheat
and result in reduced braking efficiency.

HOW TO SAVE FUEL AND MAKE

YOUR VEHICLE LAST LONGER

Improving fuel economy is easy — just take it easy.  It will help
make your vehicle last longer, too.  Here are some specific tips
on how to save money on both fuel and repairs:

Keep your tires inflated at the correct pressure.  Check
the pressure every two weeks, or at least once a month.
Underinflation causes tire wear and wastes fuel.

Do not carry unneeded weight in your vehicle.  Excess
weight puts a heavier load on the engine, causing greater
fuel consumption.

Avoid lengthy warm-up idling.  Once the engine is
running smoothly, begin driving — but gently.  Remember,
however, that on cold winter days this may take a little
longer.

Always keep the automatic transmission selector lever
in the “D” position when engine braking is not required.
Driving with the overdrive off will reduce the fuel economy.
(For details, see “Automatic transmission (standard type)”
or “Automatic transmission (multi-mode type)” on page 437
or 446.)

Accelerate slowly and smoothly.  Avoid jackrabbit starts.

Avoid long engine idling.  If you have a long wait and you
are not in traffic, it is better to turn off the engine and start
again later.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands