manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 485

STARTING AND DRIVING

466

For the vehicle-to-vehicle distance control mode, see
“Vehicle-to-vehicle  distance control mode” on page 466.  For
the conventional (fixed speed) cruise control mode, see
“Conventional (fixed speed) cruise control mode” on page 481.

Vehicle-to-vehicle  distance control mode

The laser radar sensor in this system primarily detects the
reflectors of the vehicle ahead of you to determine the
presence of the vehicle ahead as well as measuring the
vehicle-to-vehicle  distance.  The detection range of the
sensor is about 120 m (400 ft.) ahead.

CAUTION

Dynamic laser cruise control is not a
collision-avoidance  system and will not prevent
accidents.  Dynamic laser cruise control is a vehicle
speed control device that is intended for use only on
freeways or roads where the traffic is light or moderate.
To avoid serious injury, you must use caution and be
attentive to road and traffic conditions while using
dynamic laser cruise control.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands