manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 463

STARTING AND DRIVING

444

(f)

Good driving practice

If the transmission repeatedly shifts up and down between
fourth and overdrive gears when climbing a gentle slope,
shift the selector lever to the “4” position.  Be sure to shift the
selector lever to the “D” position after climbing the slope.

When towing a trailer, in order to maintain efficient engine
braking and electrical charging performance, do not use
overdrive.

CAUTION

Always keep your foot on the brake pedal while stopped
with the engine running.  This prevents the vehicle from
creeping.

NOTICE

Always use the brake pedal or parking brake to hold the
vehicle on an upgrade.  Do not attempt to hold the
vehicle using the accelerator pedal, as this can cause
the transmission to overheat.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands