manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 227

OCCUPANT RESTRAINT SYSTEMS

208

When the airbags inflate, they produce a fairly loud noise and
release some smoke and residue along with non-toxic gas.
This does not indicate a fire.  This smoke may remain inside the
vehicle for some time, and may cause some minor irritation to
the eyes, skin or breathing.  Be sure to wash off any residue as
soon as possible to prevent any potential skin irritation with
soap and water.  If you can safely exit from the vehicle, you
should do so immediately.

Deployment of the airbags happens in a fraction of a second,
so the airbags must inflate with considerable force.  While the
system is designed to reduce serious injuries, it may also
cause minor burns or abrasions and swelling.

Front seats as well as parts of the front and rear pillars, and roof
side rail may be hot for several minutes, but the airbags
themselves will not be hot.  The airbags are designed to inflate
only once.

CAUTION

SRS side airbags and curtain shield airbags inflate with
considerable force.  To reduce the possibility of death
or serious injury when they inflate, the driver, front
passenger and rear outside passengers must:

Wear their seat belts properly.

Remain properly seated with their backs upright and
against the seats at all times.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands