manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 74

74

1-1. For safe use

HIGHLANDER_HV_U (OM48F02U)

■

Booster seat

Adjusting the seat

Second seats

Fold the seatback while pull-
ing the lever. Return the
seatback and secure it at the
1st lock position (most
upright position).

Move the seat as far back as
possible.

Third seats

Fold the seatback while pull-
ing the strap. Return the
seatback and secure it at the
1st lock position (most
upright position).

Place the child restraint system on the seat facing the front of the
vehicle.

If your child restraint system interferes with a head restraint and cannot
be installed properly, install the child restraint system after removing the
head restraint. (

P. 170)

1

2

High back type

Booster type

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands