manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 330

330

5-1. Using the air conditioning system and defogger

HIGHLANDER_HV_U (OM48F02U)

Front side outlets

Direct air flow to the left or right,
up or down.

Closes the vent

Slide the knob to the most out-
ward position.

Opens the vent

■

Operation of the air conditioning system in Eco drive mode

In Eco drive mode, the air conditioning system is controlled as follows to pri-
oritize fuel efficiency:

●

Engine speed and compressor operation controlled to restrict heating/cool-
ing capacity

●

Fan speed restricted when automatic mode is selected

To improve air conditioning performance, perform the following operations:

●

Adjust the fan speed

●

Turn off Eco drive mode (

P. 238)

■

Using automatic mode

Fan speed is adjusted automatically according to the temperature setting and
the ambient conditions.

Therefore, the fan may stop for a while until warm or cool air is ready to flow

immediately after 

 is pressed.

1

2

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands