Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 244

Page: 244 / 604

244

HIGHLANDER_HV_U (OM48F02U)

4-3. Operating the lights and wipers

Turning the end of the lever turns on the lights as follows:

The headlights, day-
time running lights and
all the lights listed
below turn on and off
automatically.
(When the power
switch is in ON mode)

The side marker, park-
ing, tail, license plate,
daytime running lights
and instrument panel
lights turn on.

The headlights and all the lights listed above (except day-
time running lights) turn on.

The daytime running lights turn off.

The daytime running lights turn on.

: For U.S.A.

: For Canada

Headlight switch

The headlights can be operated manually or automatically.

Operating instructions

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2015

Reviews:

Brands by name

Popular brands

Toyota Highlander Hybrid 2015, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2015

Reviews:

Brands by name

Popular brands