manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 512

512

7-2. Steps to take in an emergency

HIGHLANDER_HV_U (OM48F02U)

Set the parking brake.

Turn the power switch to ACCESSORY mode.

Depress the brake pedal.

Pry the cover up with a flathead
screwdriver or equivalent tool.

To prevent damage to the cover,
cover the tip of the screwdriver with
a rag.

Press the shift lock override
button.

The shift lever can be shifted while
the button is pressed.

If the shift lever cannot be shifted from P

If the shift lever cannot be shifted with your foot on the brake
pedal, there may be a problem with the shift lock system (a sys-
tem to prevent accidental operation of the shift lever). Have the
vehicle inspected by your Toyota dealer immediately.
The following steps may be used as an emergency measure to
ensure that the shift lever can be shifted:

1
2
3
4

5

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands