manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 247

247

4-3. Operating the lights and wipers

4

Drivin

g

HIGHLANDER_HV_U (OM48F02U)

■

Battery-saving function

In the following conditions, the remaining lights will go off automatically after
20 minutes in order to prevent the vehicle battery from being discharged:

●

The headlights and/or tail lights are on.

●

The power switch is turned to ACCESSORY mode or turned off. 

This function will be canceled in any of the following situations:

●

When the power switch is turned to ON mode.

●

When the light switch is operated.

●

When any of the doors is opened or closed.

■

Customization

Settings (e.g. light sensor sensitivity) can be changed. 
(Customizable features: 

P. 563)

NOTICE

■

To prevent 12-volt battery discharge

Do not leave the lights on longer than necessary when the hybrid system is
off.

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands