manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 276

276

4-5. Using the driving support systems

HIGHLANDER_HV_U (OM48F02U)

Constant speed control mode differs from vehicle-to-vehicle distance
control mode. When constant speed control mode is selected, your
vehicle will maintain a set speed regardless of whether or not there
are other vehicles in the lane ahead.

Press the “ON-OFF” button to
activate the cruise control.

Press the button again to deacti-
vate the cruise control. 

Switch to constant speed con-
trol mode.
(Push the lever forward and
hold for approximately one sec-
ond.) 

Constant speed control mode indicator will be displayed.

When in constant speed control mode, to return to vehicle-to-vehicle dis-
tance control mode, push the lever forward again and hold for approxi-
mately 1 second.

After the desired speed has been set, it is not possible to return to vehicle-
to-vehicle distance control mode.

If the power switch is turned off and then turned to ON mode again, the
vehicle will automatically return to vehicle-to-vehicle distance control
mode.

Adjusting the speed setting: 

P. 271

Canceling and resuming the speed setting: 

P. 273

Selecting conventional constant speed control mode

1

2

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands