Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 351

Page: 351 / 604

351

rior fe

atures

HIGHLANDER_HV_U (OM48F02U)

5-4. Using the other interior features

To set the visor in the forward
position, flip it down.

To set the visor in the side posi-
tion, flip down, unhook, and
swing it to the side.

To use the side extender, place
the visor in the side position,
then slide it backward.

Open the cover.

The vanity light turns on.

■

To prevent 12-volt battery discharge

If the vanity lights remain on for 20 minutes while the hybrid system is off, the
lights will turn off automatically.

Other interior features

Sun visors

Vanity mirrors

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2015

Reviews:

Brands by name

Popular brands

Toyota Highlander Hybrid 2015, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2015

Reviews:

Brands by name

Popular brands