manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 137

137

3-2. Opening, closing and locking the doors

3

Op
eration

 o

f each

 compo

nen

t

HIGHLANDER_HV_U (OM48F02U)

■

Luggage compartment light

The luggage compartment light turns on when the back door or glass hatch is
opened with the luggage compartment light switch on.

■

After the back door has been opened and then closed

Lock the back door again as the back door will not lock automatically.

■

If the back door opener is inoperative

The back door can be unlocked from the inside.

On

Off

When the power switch is turned off, the
light will go off automatically after 20 min-
utes.

Remove the cover on the back door
trim.

Use a cloth to prevent scratches.

Move the lever for the back door motor.

1
2

1

2

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands