manualshive.com logo in svg

Toyota Highlander Hybrid 2015, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 284

284

4-5. Using the driving support systems

HIGHLANDER_HV_U (OM48F02U)

Press the LDA switch to activate the system.

The LDA indicator and lane lines will come on.

Press the switch again to turn the LDA system off.

The LDA system will remain on or off even if the power switch is turned to
ON mode.

●

When the vehicle speed is approximately 32 mph (50 km/h) or
more

●

When the lane width is more than approximately 8.2 ft. (2.5 m)

●

When driving on a straight road or through a curve with a radius of
more than approximately 328 ft. (100 m)

Turning the LDA system on

Vehicles with monochrome dis-
play

Vehicles with color display

Operating conditions

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands