Toyota Highlander Hybrid 2015 Owner'S Manual Download Page 147

Page: 147 / 604

147

3-2. Opening, closing and locking the doors

Op
eration

f each

compo

nen

HIGHLANDER_HV_U (OM48F02U)

WARNING

●

Do not close the glass hatch while the rear wiper is switched on. The rear
wiper arm may be restarted suddenly after closing the glass hatch.

NOTICE

■

Glass hatch damper stays

The glass hatch is equipped with damper stays that hold the glass hatch in
place. Observe the following precautions.

Failure to do so may cause damage to the glass hatch damper stay, result-
ing in malfunction.

●

Do not place your hand or foot on the damper stay or apply lateral forces
to it.

●

Do not insert any object in the wiper
motor drive disc.

●

Do not attach any foreign objects, such
as stickers, plastic sheets, or adhesives
to the damper stay rod.

●

Do not touch the damper stay rod with
gloves or other fabric items.

●

Do not attach any accessories other
than genuine Toyota parts to the glass
hatch.

Damper stays

Summary of Contents for Highlander Hybrid 2015





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2015

Reviews:

Brands by name

Popular brands

Toyota Highlander Hybrid 2015, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2015

Reviews:

Brands by name

Popular brands